Re: Optimal -3db high pass point for volume control? - Victor Khomenko

Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

Follow Ups Full Thread

Topic - Optimal -3db high pass point for volume control? - andy evans 17:06:35 03/04/06 (25)

Some pretty good advice below Andy ... - Naz 05:03:29 03/06/06 (0)

Re: Optimal -3db high pass point for volume control? - Dave Cigna 15:35:18 03/05/06 (2)

Re: Optimal -3db high pass point for volume control? - andy evans 16:39:35 03/05/06 (1)

Re: Optimal -3db high pass point for volume control? - Chris Jennings 00:26:06 03/06/06 (0)

A 1/4 HZ - 3 dB down point will DO OK. - drlowmu 11:21:03 03/05/06 (6)

Re: A 1/4 HZ - 3 dB down point will DO OK. - andy evans 13:27:13 03/05/06 (3)

Good question.......... - drlowmu 18:05:44 03/05/06 (1)

My experience is that extended bandwidth in the electronics... - Allen Wright 05:00:52 03/06/06 (0)

The secret is in Fourier analysis - BBeck 13:42:19 03/05/06 (0)

Zero Hertz better yet - BBeck 13:24:13 03/05/06 (1)

Re: Zero Hertz better yet - drlowmu 08:25:51 03/06/06 (0)

Re: Optimal -3db high pass point for volume control? - andy evans 03:28:00 03/05/06 (5)

Have a look at this. - Tre' 11:11:06 03/05/06 (1)

Re: Interesting!!! - andy evans 13:23:23 03/05/06 (0)

Andy, there are musical fundamentals below 32Hz, and if you use a filter point somewhere... - jeffreybehr 08:18:55 03/05/06 (2)

Yes, but 32Hz is the lowest commonly used - andy evans 10:06:19 03/05/06 (1)

'Zero' is not the correct term. 'Filter point' is, and that's defined as the frequency that's -3dB. BUT... - jeffreybehr 14:11:55 03/05/06 (0)

Re: Optimal -3db high pass point for volume control? - Chris Jennings 02:54:15 03/05/06 (2)

Response of OPT?? - andy evans 14:43:56 03/05/06 (1)

Re: Response of OPT?? - Chris Jennings 00:20:38 03/06/06 (0)

Re: Optimal -3db high pass point for volume control? - BBeck 18:37:26 03/04/06 (4)

Re: Optimal -3db high pass point for volume control? - Victor Khomenko 20:32:28 03/04/06 (3)

Re: Optimal -3db high pass point for volume control? - BBeck 05:43:44 03/05/06 (1)

Re: Optimal -3db high pass point for volume control? - Victor Khomenko 06:03:03 03/05/06 (0)

No, he doesn't mean 'zero'. I presume by 'The pole' he means the filter point, which is the -3dB point. - jeffreybehr 21:10:34 03/04/06 (0)

Follow Ups

Re: Optimal -3db high pass point for volume control? - Victor Khomenko 06:03:03 03/05/06 (0)