|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: ripple #s for 2a3 push pull posted by rage on November 6, 2024 at 07:44:30:
"from my simulating a single stage 5H choke input and 800uF - is pretty noisy in PSUD2."
That's much more capacitance than is used by most legacy amps of much greater power, and they're clean. What is PSUD showing you? About the input stages, they should be decoupled with RC networks, which will push this down further.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: ripple #s for 2a3 push pull - Triode_Kingdom 10:03:27 11/07/24 (3)
- RE: ripple #s for 2a3 push pull - rage 10:04:19 11/07/24 (2)
- RE: ripple #s for 2a3 push pull - Triode_Kingdom 10:10:45 11/07/24 (1)
- RE: ripple #s for 2a3 push pull - rage 10:16:13 11/07/24 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
