|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: RE: ".3H 10 ohms" is pretty useless here posted by Chip647 on November 6, 2024 at 15:35:27:
for me the necessary evil is the most fun part!I use the 400uF Wima caps in my SE 2a3 amp following a big 10H Hammond l-critical choke.
They are polypropylene. I would not describe them as slow. Dimensions are roughly 2" x 3".
In the case of my 2a3 SE amp I have seperate power supply and audio chassis. PS is 10H, 800uF. In the audio chassis I use a 10 ohm .3H, then 100uF which feeds finals..following that is a 2k R-dropper and 30uF for the front end 6n7 tube. It is a very clean supply. ~ 60 ohms DCR - enough to give medwin a heart attack.
Edits: 11/07/24
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: ".3H 10 ohms" is pretty useless here - rage 04:28:52 11/07/24 (3)
- RE: ".3H 10 ohms" is pretty useless here - PakProtector 15:58:36 11/08/24 (0)
- RE: ".3H 10 ohms" is pretty useless here - rage 07:22:20 11/07/24 (0)
- Your question: "but am I over doing it given its push pull?" - Chip647 07:18:06 11/07/24 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
