|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Balanced / XLR outputs posted by myles on January 29, 2007 at 09:00:09:
...and use the output tranny balanced from c to 16 ohm because the 4 ohm would now become ground due to turns ratio squared. But there are few 16 ohm speakers. You would have to disconnect the C tap from ground!
"I take you as you are
And make of you what I will,
Skunk-bear, carcajou, bloodthirsty
Non-survivor.
Lord, let me die but not die out." THE LAST WOLVERINE by James Dickey
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- You can ground the 4 ohm tap instead of the C tap.... - grhughes 11:54:11 01/29/07 (3)
- And also connect the 4 ohm tap to the speaker basket? - andy evans 13:51:28 01/29/07 (1)
- On some speakers the basket frame is connected to one end of the voice coil. - grhughes 14:25:27 01/29/07 (0)
- More... - grhughes 11:58:51 01/29/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
