|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: What size bleeder resistor to drain filter caps? posted by RioTubes on January 27, 2007 at 10:24:02:
I use a 1K, 10 watt with a piece of rubber hose around the resistor and in rubber booted insulated Mueller alligator clips.
"I take you as you are
And make of you what I will,
Skunk-bear, carcajou, bloodthirsty
Non-survivor.
Lord, let me die but not die out." THE LAST WOLVERINE by James Dickey
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: What size bleeder resistor to drain filter caps? - grhughes 10:29:25 01/27/07 (4)
- more... - grhughes 10:31:03 01/27/07 (3)
- 200K or more from HT to ground should work okay (NT) - zobsky 07:03:51 01/28/07 (0)
- Re: more... - Pär 12:36:43 01/27/07 (1)
- Thanks grhughes and Par (nt) - RioTubes 13:25:42 01/27/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
