|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Re: Tube Distortion and Bias ... a perspective posted by keto on July 7, 2006 at 16:10:08:
Hi Keto,What happens in at the plate is largely a reflection of what occurs at the speaker terminals but is more difficult to measure due to high voltages.
BTW, I should have stated that the 300B amps that I measured should not be taken as representative of all 300B amps. They are also capable of producing very low distortion if done right. But I think that too many designs make power a priority to the detriment of linearity.
Naz
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Tube Distortion and Bias ... a perspective - Naz 17:45:32 07/07/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
