|
Tape Trail Reel to reel, cassette and other analogue tape formats. |
|
|
|
Tape Trail Reel to reel, cassette and other analogue tape formats. |
|
In Reply to: Re: Saki Glass Ferrite Heads posted by grhughes on January 5, 2006 at 06:54:14:
Hi -When I ran the Saki heads at 30ips, I recall they started rolling off below 25hz and there was a db to a db and a half or so head bump at around 30 hz. When I ran the bias frequency tests, I noted an improvement in SQ all the way up to at least 400khz. Much higher than that I couldn't pump enough bias through the record head to properly bias the tape. For the erase head, I stayed with the 100khz stock bias but made it switchable so that I could record fresh onto bulk erased tape for lower noise.
Not being able to find tape would be a problem. Probably I better scope that out a bit before I commit much more effort to this.
Best wishes,
Tom Dawson
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Saki Glass Ferrite Heads - Tom Dawson 10:08:20 01/05/06 (1)
- Re: Saki Glass Ferrite Heads - grhughes 12:27:59 01/05/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
