In Reply to: Question on tape cleaning machine posted by unclestu52 on September 16, 2006 at 13:12:48:
I was an engineer at Kybe. It was a great place to work and ot always pleases me to see these old machines running. If you want to run narrower tape on it, you can lower the tension and current limit settings. There are two adjustment potentiometers on the motor drive board mounted on the back side of the deck. The current limit is the one at the top of the board and the tension is the one on the side. You'll need a small screwdriver to adjust. Experiment with it and you should figure it out. Good luck!
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Question on tape cleaning machine - ffitz 20:11:09 01/06/07 (1)
- Re: Question on tape cleaning machine - ffitz 20:14:40 01/06/07 (0)