In Reply to: Wrong, don't forget aluminum is a paramagnet, not non-magnetic. posted by cheap-Jack on January 8, 2007 at 12:57:31:
cj: ""
I said in my previous post the CD 'magnetizer' I tested gave out a loud vibration noise showing the very strong magnetic field was acting onto the CD under test.""
That is why I asked about the cd getting hotter. Eddy current dissipation possibility.cj: ""
I can only suggest the temporary horrible sound generated immediately after the treatment is that aluminum, being a paramagnetic material, not non-magnetic like wood or plastic, is still affected MOMENTARILY by the very strong magnetic field.""
By definition, paramagnetic states no residual after the field is gone, not a time dependent decay. So it should be affected only when the field is on, not after. This is exactly what you say in the next sentences:
cj: ""
In other words, the dipoles of their atoms or modules do not interact with each other until a strong external magnetic field applied to them. But once the magnetic field is removed, the atom dipoles are back to their random orientations. ""cj: ""
My question is: how such strong magnetic field would improve the music - as the CD magnetizer vendors so claimed? Neither my test showed it, nor the paramagnetic science can explain it.If any claim cannot be explained by theroy & any rationals, or proven in practice, I would dismiss it as snake oil."
Concur on both points. However, what is still in question is, why there was a lasting effect you heard. The only thing I can think of is thermal, that's the kind of time constant you're alluding to. So my question, did the thingy heat the cd up at all?Cheers, John
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- I kinda knew that about aluminum...use it a lot in magnets.. - jneutron 13:10:40 01/08/07 (4)
- Yes, it could be a thermal shock effect. - cheap-Jack 13:22:45 01/08/07 (3)
- Re: Yes, it could be a thermal shock effect. - jneutron 13:29:52 01/08/07 (2)
- But the laser sensor reads only 1 or O. - cheap-Jack 13:42:54 01/08/07 (1)
- Actually, it determines bit value by the reflection coefficient. - jneutron 13:51:39 01/08/07 (0)