|
Pro Audio Asylum Pro studio recording equipment and music production/industry. |
|
|
|
Pro Audio Asylum Pro studio recording equipment and music production/industry. |
|
In Reply to: Re: 16 tracks of ad/da and an audio interface card? posted by George on August 26, 2002 at 21:27:23:
The standard for the ADAT Lightpipe has always been 24 bit. ie. it has always been capable of passing 24 bit if present.Check out RME Multiface. 24/96 8 analog i/o. You would need to run 2.
Very high quality and fantastic support.The older Hammerfall series also offered A/D plug-on cards so you could go that route too. The 96/52 offered 3 ADAT i/o's but you could plug an 8 chan. A/D into two of the ADAT connectors thus replacing an ADAT i/o with an A/D i/o. So you end up with 16 balanced A/D i/o and an ADAT i/o(8 chan) as well as S/PDIF and wordclock.
follow this link and look at left side Hammerfall DSP Click Multiface.
S
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- ADAT is 24 bit and always has been. - Swingline 05:40:17 09/11/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
