|
Pro Audio Asylum Pro studio recording equipment and music production/industry. |
|
|
|
Pro Audio Asylum Pro studio recording equipment and music production/industry. |
|
In Reply to: Major oops here. posted by Bill Fitzmaurice on September 13, 2004 at 14:45:13:
Thanks for that Bill, informative, yet dissapointing to know that about the driver :( .I was under the impression that certain enclosures raised the overall Qts somehow, is this correct?
When you say "many" high spl pro-sound drivers, are you excluding the JBL 2226h from that statement. I've seen quite a few people using this driver for sub duties, mostly in bass reflex boxes, tuned between 35hz and 45hz. Is this even a good candidate for such a purpose?
I was of the thinking a large(15",18" or bigger)pro-sound driver was the way to go for sub duties, as you have a large diameter cone moving much less excursion wise, than say a long-throw 8" for any given input at any given frequency. I thought this cut down on distortion, power compression etc significantly. But then I'm not hugely experienced in this area, so if it's otherwise, do tell.
Are there any large format pro-sound drivers you would reccomend for sub duties, if you'd reccomend this way of doing things at all?
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Major oops here. - mctwintub 16:39:48 09/13/04 (4)
- Re: Major oops here. - Bill Fitzmaurice 17:22:42 09/13/04 (3)
- Re: Major oops here. Observation. - dwkurfma 19:45:46 09/13/04 (2)
- Re: Major oops here. Observation. - Jacques 09:41:24 09/14/04 (0)
- De-glossing. - Bill Fitzmaurice 05:23:53 09/14/04 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
