In Reply to: A short run is all I need but I like the electrical disconnect advantage anyway posted by dave in gva on February 21, 2007 at 11:02:59:
If everything is in the basement anyway, there's no need for the three components to be next to each other. In fact, the further apart they are, the less the chance of EMI interference between them. You don't need to be on opposite ends of the room - even a few feet/metres may make a big difference.And you probably want to avoid powering the amp and DAC using the same circuit as the PC, for reasons already discussed (possibility of interference).
What you can do if you are really keen is:
- power the amp and DAC using a dedicated power line, and put some filtering/condition on this circuit.
- the PC can be powered the household circuit, and turns the amp and DAC on and off using X10.
- volume control can be achieved using IR blasting as you suggest
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Here's a crazy idea - Christine Tham 12:05:31 02/21/07 (2)
- Thanks will give it some thought.....whats X10 (nt)? - dave in gva 19:54:14 02/22/07 (1)
- http://en.wikipedia.org/wiki/X10_(industry_standard) - Christine Tham 20:41:03 02/22/07 (0)