In Reply to: Re: More on Optical USB Cable posted by John Swenson on March 20, 2006 at 20:39:35:
" ... Given running the device end with a clean PS you should theoretically be able to run a pretty clean signal coming out. ..."Anyone's suggestion for an off the shelf power supply substitute or improvement for these Opticis Optical Isolators (USB Extensions) will be appreciated. The manufacturer is always interested in customer feedback and suggestions for device improvements. There might be an opportunity to change or substitute an alternate PS for the factory supplied standrad PS. Worst case, we might supply a "improved audio" alternate PS or as an option. (Requirements are to be to USB.Org standards: 5.0 VDC (+/- 2%), 1.5 Amp (10 to 12 Watts), 1/8" center positive plug.)
Perhaps there an addon filter for power supplies for USB Audio devices.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: More on Optical USB Cable - FastEddy 14:18:05 04/20/06 (1)
- Re: More on Optical USB Cable - pburke 14:18:57 04/21/06 (0)