Power cord ugrade

OTL Asylum

OTL, Output Transformerless Amplifier User Group.

Power cord ugrade

Posted by Satelliteman (A) on September 21, 2006 at 19:51:20

In Reply to: Re: collective current posted by Ralph on September 20, 2006 at 15:13:32:

Although the current should be considered for the ratings of the powercords ...I can assure you that primary mains current on the toroids is approx 1/2 what is present in the US . We have 230 vac supply here , and I think its approx 240 in Australia . I think the secondary voltages ..esp the output stage supplies , are down slightly because the Toroids were wound with 240 primaries , instead of 230 vac . However - a plus to this is , that if I move to australia ...things will be fine ! - not stressed .
Guys - Im fine with the TOTAL build outcome - really
Stu

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - Power Calculations - No Clipping - Satelliteman 15:06:26 09/17/06 (13)

Re: Power Calculations - No Clipping - gusser 15:53:47 09/19/06 (9)

Re: Power Calculations - No Clipping - Satelliteman 16:04:39 09/19/06 (8)

Re: collective current - Ralph 15:13:32 09/20/06 (7)

Power cord ugrade - Satelliteman 19:51:20 09/21/06 (1)

Re: Power cord ugrade - TUBEVIBB 07:02:13 09/22/06 (0)

In the US - ...No , im in New Zealand . 230 - 240 VAC - Satelliteman 19:22:18 09/20/06 (4)

Re: In the US - ...No , im in New Zealand . 230 - 240 VAC - Ralph 10:19:04 09/21/06 (0)

Re: In the US - ...No , im in New Zealand . 230 - 240 VAC - tubevibb 05:19:50 09/21/06 (2)

output stage voltage - Satelliteman 00:06:30 09/24/06 (1)

Re: output stage voltage - tubevibb 06:21:30 09/24/06 (0)

Re: Power Calculations - No Clipping - Legendre 16:37:34 09/18/06 (2)

Re: Power Calculations - No Clipping - Satelliteman 22:58:26 09/18/06 (1)

Re: Power Calculations - No Clipping - Legendre 04:17:04 09/20/06 (0)

Follow Ups

Power cord ugrade - Satelliteman 19:51:20 09/21/06 (1)

Re: Power cord ugrade - TUBEVIBB 07:02:13 09/22/06 (0)

Post a Message!