|
OTL Asylum OTL, Output Transformerless Amplifier User Group. |
|
|
|
OTL Asylum OTL, Output Transformerless Amplifier User Group. |
|
In Reply to: Re: back panel/connections for MP-3 posted by mark on April 1, 2001 at 15:34:23:
You just need to unsolder the leads to the Lemo connector on the junction box and then resolder your balanced cable straight to the Lemo and the ground to the junction box per Mark's wiring diagram. If you can solder it is really not that difficult.
Good Luck,
Steve
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: back panel/connections for MP-3 - Steve 04:45:23 04/02/01 (1)
- Re: back panel/connections for MP-3 - frank 19:33:58 04/05/01 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
