Reduced output on M-60 Mk11 - F.S. 09:58:10 11/19/99 (2) Re: Reduced output on M-60 Mk11 - mark 19:31:51 11/20/99 (1) Re: Reduced output on M-60 Mk11 - F.S. 21:40:09 11/20/99 (0) schematic MA-2 - Michel Dirkse 04:07:50 11/19/99 (5) Re: schematic MA-2 - mark 19:39:14 11/20/99 (4) Is the MA-2/1 just a big M-60? - Chris W 05:37:30 11/21/99 (3) Almost... - mark 10:48:01 11/21/99 (2) Re: Almost... - Dan 19:23:30 11/24/99 (1) Re: Almost... - mark 14:33:31 11/29/99 (0) DMM for setting bias - George M 14:05:23 11/17/99 (1) Re: DMM for setting bias - George M 15:30:29 11/17/99 (0) MA-1 Mark II & Bi-amped Magnepan 3.5Rs - Barry 17:50:42 11/16/99 (2) Re: MA-1 Mark II & Bi-amped Magnepan 3.5Rs - Gary Baker 05:52:57 11/20/99 (1) Re: MA-1 Mark II & Bi-amped Magnepan 3.5Rs - joseph Stocco 19:17:33 11/21/99 (0) MESSAGE FOR MARK GILMORE-STARVING THE FILAMENTS ON THE 12SX7 - F. NEAL 14:33:17 11/16/99 (5) Re: MESSAGE FOR MARK GILMORE-STARVING THE FILAMENTS ON THE 12SX7 - John Harper 06:26:22 11/17/99 (1) Re: MESSAGE FOR MARK GILMORE-STARVING THE FILAMENTS ON THE 12SX7 - F. NEAL 15:05:18 11/17/99 (0) Sounds like fun! - mark 15:58:55 11/16/99 (1) Re: Sounds like fun! - F. NEAL 16:14:31 11/16/99 (0) What is a 6sa7 tube? not 6AS7, but 6sa7. (NT) - Greg 09:43:45 11/16/99 (1) It's a "pentagrid converter". - mark 10:04:38 11/16/99 (0) Mark: Can we make this BBS searchable ? - Edward Kerslake 17:07:45 11/15/99 (2) But of course! - mark 18:51:45 11/15/99 (0) MA-240 vs MA2 - Rick Richardson 08:15:13 11/15/99 (0) Any M-60 Owners in NJ? - Marc 22:44:37 11/14/99 (0) three more questions - plate resistors, constant current and caps - Nicholas 09:56:59 11/14/99 (3) Re: three more questions - plate resistors, constant current and caps - mark 14:52:03 11/14/99 (2) Re: three more questions - plate resistors, constant current and caps - Nicholas 02:00:57 11/15/99 (1) Re: three more questions - plate resistors, constant current and caps - F. NEAL 17:23:23 11/15/99 (0) INPUT IMPENDANCE MATCHING!!!!! - Tim Starr 08:24:55 11/14/99 (2) Re: INPUT IMPENDANCE MATCHING!!!!! - mark 14:53:54 11/14/99 (1) A G4 is. - Tim 17:21:33 11/14/99 (0) QUESTION FOR MARK GILMORE: RE- BALANCE & BIAS - NEW KIT OWNER 12:58:13 11/13/99 (3) Re: QUESTION FOR MARK GILMORE: RE- BALANCE & BIAS - mark 16:34:56 11/13/99 (2) Re: QUESTION FOR MARK GILMORE: RE- BALANCE & BIAS - NEW KIT OWNER 13:04:15 11/14/99 (1) Re: QUESTION FOR MARK GILMORE: RE- BALANCE & BIAS - mark 14:52:52 11/14/99 (0) FS:NOVACRONS - Alan Winslow 05:34:22 11/13/99 (1) He bought this @ $1450 - Bill 08:46:16 11/19/99 (0) Mullards as subs for 6SN7s: OK or not? - DK 01:00:02 11/13/99 (5) Re: Mullards as subs for 6SN7s: OK or not? - mark 16:38:49 11/13/99 (0) Re: Mullards as subs for 6SN7s: OK or not? - Gary Baker 15:52:47 11/13/99 (2) Re: Mullards as subs for 6SN7s: OK or not? - georgeh 15:05:57 11/14/99 (1) Re: Mullards as subs for 6SN7s: OK or not? - Gary Baker 07:22:54 12/04/99 (0) Mark: Can't get enough Bias with 6336A's - Edward Kerslake 09:05:01 11/12/99 (3) I'm already too biased! - mark 10:15:42 11/12/99 (2) Re: I'm already too biased! - edward kerslake 14:01:03 11/12/99 (1) Beware the stepped pot! - mark 15:34:49 11/12/99 (0) 2 questions - Nicholas 02:54:39 11/12/99 (1) Re: 2 questions - Dan 07:36:17 11/12/99 (0) 25-60 VAC floating on the chassis? - Dan 08:28:59 11/09/99 (3) Re: 25-60 VAC floating on the chassis? - mark 08:23:15 11/10/99 (2) Re: 25-60 VAC floating on the chassis? - Dan 15:12:45 11/10/99 (1) Re: 25-60 VAC floating on the chassis? - mark 06:58:55 11/11/99 (0) bi-amping with ma-60"s or 2a3 - mike 21:12:49 11/08/99 (0) Dc Offset Problem - Dave H 15:50:49 11/08/99 (5) Re: Dc Offset Problem - Dan 07:50:43 11/09/99 (0) Re: Dc Offset Problem - mark 07:48:55 11/09/99 (3) Re: Dc Offset Problem - Dave 17:32:22 11/10/99 (2) Re: Dc Offset Problem - mark 07:05:37 11/11/99 (1) Re: Dc Offset Problem - Dave 16:57:26 11/14/99 (0) 6080-WC in M60? - Dan 12:39:20 11/08/99 (3) Re: 6080-WC in M60? - mark 07:39:23 11/09/99 (2) Re: 6080-WC in M60? - Dan 07:48:05 11/09/99 (1) Re: 6080-WC in M60? - mark 14:26:50 11/09/99 (0) MA2 mk2 - kim zwerner 19:01:49 11/06/99 (2) Re: MA2 mk2 - mark 14:00:44 11/07/99 (1) Re: MA2 mk2 - kim 14:19:52 11/07/99 (0) more on 7241 tubes - Jim Dowdy 02:14:39 11/04/99 (6) Re: more on 7241 tubes - mark 07:49:55 11/04/99 (5) Re: more on 7241 tubes - ralph 09:14:08 11/04/99 (4) Re: more on 7241 tubes - Jim Dowdy 11:39:56 11/04/99 (3) Re: more on 7241 tubes - mark 12:53:08 11/04/99 (2) Re: more on 7241 tubes - Jim Dowdy 00:04:35 11/05/99 (1) Re: more on 7241 tubes - mark 05:25:05 11/05/99 (0) Novacrons compared to M60 MkII's - mike 20:06:20 11/03/99 (4) Re: Novacrons compared to M60 MkII's - Ray Shepherd 11:35:43 11/05/99 (3) Re: Novacrons compared to M60 MkII's - mark 14:14:18 11/07/99 (2) Re: Novacrons compared to M60 MkII's - Ray Shepherd 08:42:41 11/08/99 (1) Re: Novacrons compared to M60 MkII's - mark 07:29:44 11/09/99 (0) hum - lito bernardo 01:48:00 11/03/99 (0) pre - dleroy 23:36:28 11/02/99 (8) Re: pre - Gary Baker 06:35:39 11/07/99 (2) Re: pre - Ray Shepherd 10:18:37 11/08/99 (1) Re: pre - Gary Baker 16:37:06 11/08/99 (0) Re: pre - Harry 07:12:11 11/04/99 (0) Re: pre - steve 03:53:20 11/03/99 (0) Re: pre - dleroy 23:49:48 11/02/99 (0) ResolutionCD50 - Steve 18:24:40 11/01/99 (2) Re: ResolutionCD50 - Ray Shepherd 05:37:09 11/02/99 (0) Re: ResolutionCD50 - bryan 19:26:58 11/01/99 (0) Question for Mark Gilmore 12,2 volt versus 12,6 v - Frode 10:11:59 11/01/99 (5) Re: Question for Mark Gilmore 12,2 volt versus 12,6 v - mark 16:22:38 11/01/99 (3) Re: Question for Mark Gilmore 12,2 volt versus 12,6 v - Frode 09:59:13 11/03/99 (2) I hope I got it right this time! - mark 14:52:15 11/03/99 (1) Re: I hope I got it right this time! - Frode 03:50:14 11/04/99 (0) Preamp survey - bryan 08:08:49 11/01/99 (10) Re: Preamp survey - JerryS 13:27:47 12/13/99 (0) Re: Preamp survey - georgeh 10:04:56 11/01/99 (8) Dropping names and letters... - bryan 10:25:05 11/01/99 (7) Re: M3A CDP inputs.. - Jerry P 16:14:32 11/01/99 (0) M3A - georgeh 10:49:32 11/01/99 (5) Re: M3A - bryan 11:10:28 11/01/99 (4) Re: M3A - steve 13:40:43 11/01/99 (3) Re: M3A - Gary Baker 18:43:56 11/01/99 (0) SR17 - bryan 16:13:21 11/01/99 (1) Re: SR17 - F.S. 20:48:37 11/01/99 (0) M60 w/ Vandersteen 5 - bill thomas 10:32:38 10/31/99 (0) Novacrons for Sale - mark 07:25:19 10/31/99 (4) I bought these! - I. Halberstadt 11:59:27 10/31/99 (3) Re: I bought these! - Lew 07:41:35 11/01/99 (2) Thanks for the info! - Hal 17:31:57 11/02/99 (1) Re: Thanks for the info! - John Harper 06:06:22 11/03/99 (0) MA-2 - David 15:04:11 10/30/99 (1) Re: MA-2 - mark 17:09:17 10/30/99 (0) MESSAGE FOR MARK GILMORE / RE BASIC DMM - NEW KIT BUILDER 11:07:36 10/30/99 (5) Re: MESSAGE FOR MARK GILMORE / RE BASIC DMM - mark 17:03:44 10/30/99 (4) Re: MESSAGE FOR MARK GILMORE / RE BASIC DMM - NEW KIT BUILDER 17:36:08 10/30/99 (3) Re: MESSAGE FOR MARK GILMORE / RE BASIC DMM - mark 19:07:09 10/30/99 (2) Re: MESSAGE FOR MARK GILMORE / RE BASIC DMM - NEW KIT BUILDER 11:59:29 10/31/99 (1) Thank you! - mark 12:28:02 10/31/99 (0) Seeking Opinions On Innersound Eros - Marc 10:37:10 10/30/99 (0) BASIC DMM QUESTION / OR DO I HAVE MY SPEAKER CONNECTION HOOKED UP WRONG - NEW KIT BUILDER 19:55:15 10/29/99 (2) Re: BASIC DMM QUESTION / OR DO I HAVE MY SPEAKER CONNECTION HOOKED UP WRONG - mark 07:42:43 10/30/99 (1) Re: BASIC DMM QUESTION / OR DO I HAVE MY SPEAKER CONNECTION HOOKED UP WRONG - NEW KIT BUILDER 14:36:41 10/30/99 (0) BASIC DMM QUESTION/OR DO I HAVE MY SPEAKER CONNECTIONS WIRED WRONG - NEW KIT BUILDER 19:40:32 10/29/99 (0) Advice and feedback needed - please... (longish) - bryan 11:20:47 10/29/99 (10) Why not DIY? - Dan 07:34:33 11/01/99 (2) Re: Why not DIY? - bryan 08:06:46 11/01/99 (1) Re: Why not DIY? - Phil Sieg 10:32:49 11/01/99 (0) Re: Advice and feedback needed - please... (longish) - Paul Speltz 15:27:45 10/29/99 (2) Re: Advice and feedback needed - please... (longish) - bryan 16:45:44 10/29/99 (1) Re: Advice and feedback needed - please... (longish) - Phil Sieg 09:04:29 10/30/99 (0) Hi, bryan.. - Phil Sieg 14:55:03 10/29/99 (3) Re: Hi, bryan.. - bryan 16:56:54 10/29/99 (2) Re: Hi, bryan.. - Phil Sieg 09:02:13 10/30/99 (0) Re: Hi, bryan.. - DK 18:18:17 10/29/99 (0) I need to apologize to everyone!!! - tre 23:21:48 10/28/99 (1) Re: I need to apologize to everyone!!! - Kurt Strain 14:04:12 10/29/99 (0) MESSAGE FOR MARK GILMORE RE: RECTIFYING THE 12SX7 FILAMENTS - P. BERNARD 18:26:02 10/28/99 (3) DC on the driver filaments? - mark 07:23:28 10/29/99 (2) Re: DC on the driver filaments? - P. BERNARD 14:22:46 10/29/99 (1) LM1084 - mark 16:01:40 10/29/99 (0) New News - mark 07:06:06 10/26/99 (2) Re: New News - Dan 07:39:24 10/26/99 (1) Re: New News - mark 09:53:44 10/26/99 (0) S30 speaker recommendations - Jim Covington 05:49:01 10/26/99 (1) Re: S30 speaker recommendations - Emil 12:49:15 10/26/99 (0) Any Michael Green Design Speaker Owners? - Kurt Morgan 15:42:02 10/25/99 (0) MESSAGE FOR MARK GILMORE: RE HOOKUP WIRE & RECTIFING THE AC DRIVER FILAMENTS - P. BERNARD 14:20:32 10/24/99 (9) Re: MESSAGE FOR MARK GILMORE: RE HOOKUP WIRE & RECTIFING THE AC DRIVER FILAMENTS - mark 18:16:41 10/24/99 (8) 12SX7's - Dan 08:07:40 10/25/99 (7) Re: 12SX7's - Lew Markoff 08:37:58 10/25/99 (6) Re: 12SX7's - mark 10:20:40 10/25/99 (5) Re: 12SX7's - P. BERNARD 16:20:14 10/25/99 (4) Re: 12SX7's - Lew 08:08:34 10/26/99 (2) Re: 12SX7's - P. BERNARD 13:33:51 10/26/99 (1) Re: 12SX7's - Lew Markoff 13:15:57 10/27/99 (0) Re: 12SX7's - P. BERNARD 18:58:16 10/25/99 (0) Subing 6AS7? - Greg 08:22:43 10/23/99 (3) Re: Subing 6AS7? - Ralph Karsten 10:07:32 10/23/99 (2) Re: Subing 6AS7? - Phil Sieg 06:52:28 10/24/99 (0) Re: Subing 6AS7? - Dan 10:30:51 10/23/99 (0) 7241 tubes - Jim Dowdy 05:52:18 10/23/99 (4) Re: 7241 tubes - mark 08:29:17 10/23/99 (3) Re: 7241 tubes - Jim Dowdy 11:52:47 10/23/99 (2) Re: 7241 tubes - mark 12:42:24 10/23/99 (1) Re: 7241 tubes - Jim Dowdy 14:13:07 10/23/99 (0) class A power - tre 21:41:48 10/21/99 (21) Re: class A power - Kevin Covi 16:38:37 10/23/99 (0) Re: class A power - Kurt Strain 14:23:17 10/22/99 (0) Re: class A power - mark 06:41:14 10/22/99 (17) Re: class A power - tre 08:48:45 10/22/99 (0) Really class AB? - Dan 08:15:04 10/22/99 (15) Re: Really class AB?- of course! - Ralph Karsten 17:00:17 10/22/99 (2) Re: Really class AB?- of course! - tre 19:16:51 10/22/99 (1) Re: Really class AB?- 'A' of course! - Ralph 19:42:21 10/22/99 (0) Re: Really class AB? - Kurt Strain 14:30:12 10/22/99 (0) Re: Really class AB? - tre 09:06:57 10/22/99 (10) Re: Really class AB? - Kurt Strain 11:28:09 10/22/99 (9) Re: Really class AB? - tre 12:00:12 10/22/99 (8) Re: Really class AB? - Kurt Strain 14:14:55 10/22/99 (7) Re: Really class AB? - tre 16:25:05 10/22/99 (0) Re: Really class AB? - tre 15:57:57 10/22/99 (5) Re: Really class AB? - Joe Berry 20:01:01 10/22/99 (4) Re: Really class AB? - John Harper 11:03:58 10/23/99 (2) Re: Really class AB? - Kurt Strain 00:25:01 10/24/99 (1) Re: Really class AB? - John Harper 04:35:42 10/24/99 (0) Re: Really class AB? - Joe Berry 20:41:33 10/22/99 (0) Speltz's Discovery #2 - Paul Speltz 13:02:51 10/21/99 (0) M60s with B&W speakers - Robert H Lever 22:55:00 10/20/99 (0) Anybody using Super Conquests? What do you think? - Bill 10:00:50 10/20/99 (5) Re: Anybody using Super Conquests? What do you think? - Bob Lowery 21:02:47 10/26/99 (4) Forgot to ask, what amp did he use with the S.C.? (nt) - Bill 06:09:20 10/29/99 (0) Re: Anybody using Super Conquests? What do you think? - Bill 06:06:51 10/29/99 (0) Re: Anybody using Super Conquests? What do you think? - Bill 10:29:12 10/27/99 (1) Re: Anybody using Super Conquests? What do you think? - Bob Lowery 17:30:29 11/05/99 (0) Remove feedback M-60 - Frode 03:38:19 10/20/99 (0) GaAs device - Chauncy Tou 15:15:39 10/19/99 (17) Re: GaAs device - Lew Markoff 06:43:03 10/20/99 (16) Re: GaAs device - Brian Walsh 10:06:26 10/20/99 (15) Re: GaAs device - Lew Markoff 15:12:18 10/20/99 (14) Re: GaAs device - Chauncy Tou 22:57:06 10/20/99 (13) Re: GaAs device - Brian Walsh 06:55:56 10/21/99 (12) Re: GaAs device - Chauncy Tou 08:47:53 10/21/99 (11) Re: GaAs device - Lew Markoff 12:53:36 10/21/99 (10) Re: GaAs device - Chauncy Tou 17:58:52 10/21/99 (0) Re: GaAs device - Brian Walsh 15:11:26 10/21/99 (8) Re: GaAs device - Lew Markoff 07:23:14 10/22/99 (6) Re: GaAs device - Chauncy Tou 08:34:31 10/22/99 (5) Re: GaAs device - Lew Markoff 10:04:40 10/22/99 (4) Price of GaAs devices - Lew Markoff 10:13:47 10/22/99 (3) Re: Price of GaAs devices - Chauncy You 11:20:01 10/22/99 (2) Re: Price of GaAs devices - Lew Markoff 07:53:48 10/25/99 (1) Re: Price of GaAs devices - Chauncy Tou 19:45:08 10/25/99 (0) Re: GaAs device - Chauncy Tou 18:04:36 10/21/99 (0) input connection options with the M60s - DK 17:56:31 10/18/99 (2) Re: input connection options with the M60s - steve bliss 00:23:54 10/19/99 (1) Re: input connection options with the M60s - Paul Speltz 10:44:44 10/25/99 (0) MESSAGE FOR MARK GILMORE: RE BREAK IN PERIOD - NEW KIT BUILDER 15:09:57 10/18/99 (5) I want patience right now! - mark 10:40:16 10/19/99 (1) Re: I want patience right now! - NEW KIT BUILDER 13:10:58 10/19/99 (0) I'm no Mark Gilmore... - georgeh 15:51:08 10/18/99 (2) What type of electrostatics are you using? - Chris W 15:55:47 10/18/99 (1) Re: What type of electrostatics are you using? - georgeh 16:40:26 10/18/99 (0) Any InnerSound Eros driven by OTLs? - Val 07:08:40 10/18/99 (0) Different OTL's - Ramjet 06:42:23 10/18/99 (0) Help! How do I find the bad output tube(s)? - DK 23:54:48 10/16/99 (19) FOUND IT - DK 20:57:11 10/20/99 (2) Re: FOUND IT - bryan 21:22:23 10/20/99 (1) Re: FOUND IT - DK 07:37:44 10/21/99 (0) They asked me how I knew. Smoke gets in your 6AS7. - mark 10:57:00 10/19/99 (0) Re: Help! How do I find the bad output tube(s)? - steve 05:01:12 10/17/99 (14) Re: Help! How do I find the bad output tube(s)? - Bill Stephens 08:13:23 10/17/99 (4) Re: Help! How do I find the bad output tube(s)? - DK 00:16:51 10/18/99 (3) Re: Help! How do I find the bad output tube(s)? - Ralph Karsten 16:55:02 10/18/99 (0) Re: Help! How do I find the bad output tube(s)? - Bill Stephens 08:42:21 10/18/99 (0) Re: Help! How do I find the bad output tube(s)? - Bill Stephens 08:36:54 10/18/99 (0) Re: Help! How do I find the bad output tube(s)? - Harry 06:28:49 10/17/99 (8) Re: Help! How do I find the bad output tube(s)? - DK 00:20:35 10/18/99 (5) Re: Help! How do I find the bad output tube(s)? - Phil Sieg 04:52:44 10/18/99 (4) Re: Help! How do I find the bad output tube(s)? - Harry 05:48:01 10/18/99 (3) Re: Help! How do I find the bad output tube(s)? - Phil Sieg 07:35:49 10/18/99 (2) Re: Help! How do I find the bad output tube(s)? - Harry 09:03:15 10/18/99 (1) Re: Help! How do I find the bad output tube(s)? - Phil Sieg 11:46:36 10/19/99 (0) Re: Help! How do I find the bad output tube(s)? - Chris W 17:40:06 10/17/99 (1) Re: Help! How do I find the bad output tube(s)? - Harry 19:02:01 10/17/99 (0) Factory Visit - Harry 06:24:15 10/16/99 (5) Re: Factory Visit - mark 10:59:36 10/19/99 (1) Re: Factory Visit - Harry 20:40:30 10/19/99 (0) Re: Factory Visit (MA1 query) - Dan 18:07:35 10/16/99 (2) Re: Factory Visit (MA1 query) - Harry 20:20:30 10/16/99 (1) Re: Factory Visit (MA1 query) - Dan 08:28:15 10/17/99 (0) SEARCH SCHEMATIC OF THE M60-MKII .... URGENT ! - Marcus 14:27:10 10/15/99 (9) Re: SEARCH SCHEMATIC OF THE M60-MKII .... URGENT ! - George Swanson 15:34:37 10/15/99 (0) Re: SEARCH SCHEMATIC OF THE M60-MKII .... URGENT ! - georgeh 14:46:32 10/15/99 (7) Re: SEARCH SCHEMATIC OF THE M60-MKII .... URGENT ! - zak 10:59:07 10/21/99 (0) Marcus emailed me also ... sigh .. - Dan 22:04:04 10/15/99 (5) Re: Marcus emailed me also ... sigh .. - Harry 06:20:50 10/16/99 (4) moi aussi - Lew Markoff 09:00:19 10/18/99 (3) Latest from Marcus - Dan 12:04:21 10/26/99 (2) Re: Latest from Marcus - Lew 14:01:42 11/05/99 (0) Peter Sellers comedy lives on... - Chris W 05:52:06 10/27/99 (0) Source for 12SX7GT tubes - George Swanson 16:10:39 10/14/99 (0)
