|
Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
|
|
Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: VTL is another posted by E-Stat on July 8, 2024 at 23:53:35:
I've seen more than one ARC power amp like the VT100 series and similar ARC designs advertised on Audiogon with black char marks where a segment of PCB copper trace caught fire and evaporated. The common fix is to clean each end of the open copper trace and solder a jumper wire across the gap. In one ad the owner rated the amp as 9/10 excellent condition when you can plainly see the repair in the posted photos. I suspect the owner may have bought it used and had no clue that it burned up and was repaired.
Edits: 07/09/24
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- ARC: More than a burned out resistor - AbeCollins 17:14:19 07/09/24 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
