High Efficiency Speaker Asylum

Not life long.

72.220.37.3

Cougar

A

In Reply to: RE: I finally Started my DIY 2 way Horn build. posted by cawson@onetel.com on April 14, 2024 at 10:23:41

I already did a prototype about 10 years ago and have a good idea what I want. I was very close with the prototype. I don't want to be doing this years and years. I will do the best I can and try to get it within what I want/hear. Life is too short now to wasting too much time on a project.

This will be my last build of these and since I will be using the Z19 xover which I used before should be just some minor tweaking and then that's it (hopefully). I have a buddy that will helping out as well with the final tuning if need be.

Follow Ups:

crossover point? - Jon L 14:24:16 04/15/24 (3)
I have the Radian 475, but I imagine one does not want to cross the 15" woofer too high?
- RE: crossover point? - claudej1@aol.com 16:23:09 04/18/24 (2)
  depend on the woofer. 500-1200 Hz. is fine for many.
  - RE: crossover point? - lokie 05:50:11 04/19/24 (1)
    I also have the Radian 475 and my woofer is a Jensen P15LL.
    
    XO at typical Altec 2 way of 1200Hz.
    
    These DIY two way variants are da bomb. And super cheap in comparison especially with modern compression drivers. I sold a $2k vintage Altec 802B and replaced it with a $200 used Radian with no downside to my ears. I think the Radian has a bit more energy on the top which alowed me to get rid of the Altec top end booster network in the XO.
    - I have used the GPA 902's... - Cougar 07:56:37 04/20/24 (0)
      in the past with this same Z19 xover and results were very nice. My brother came over when I was letting play after i finished it. I was playing Wes Montgomery on them and he said he thought there was a real guitar player playing in the room, and he was a really good guitar player. That demo over was using cheap film caps too. but this new one will be using the Erse caps. I bought these right before ERSE stopped making them here in the USA.
      
      So this time I will use the Radian 475 and should be enough top end that I', looking for. I heard the 475's a while back and they do cymbals and strings nicely along with vocals.

Post a Followup:

FAQ

Post a Message!

Forgot Password?

Moniker (Username):
Password (Optional):
	Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:

Message:	(Posts are subject to Content Rules)

Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:	Automagically notify you when someone responds.

To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.

This post is made possible by the generous support of people like you and our sponsors:

Schiit Audio