|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Good point.! posted by unclestu52 on May 3, 2007 at 00:08:05:
That way tightening the screws doesn't cause the loop to expand out from under the screw head, a problem I have encountered in the past.
Stu
>>>>>>>>>>>The solid wire should be curled around the terminal screw with the open end of the wire in the same direction the screw tightens, clockwise. This way as the screw is tightened the the screw head causes the eye of the wire to stay closed.
Use of a pair of needle nose pliers to preform the eye of the wire can also benefit. After the wire is installed around the screw the eye can be further closed around the screw with the needle nose pliers if desired.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Good point.! - jea48 06:36:10 05/03/07 (1)
- Good point.! - unclestu52 14:18:54 05/03/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
