|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Easy Polarity Switching for Marantz SA-11... Would this work? posted by fmak on July 4, 2007 at 22:06:50:
The SA-11 uses no op amps; the output drivers are all discrete "HDAM" modules.I don't have access to a schematic, of course, but if you look at a photo of the inside of the SA-11 it appears that there are SIX of the HDAMs present (occupying the rear 3/4 of the circuit board along the right side of the player).
I would assume (I know, I know...) that there is one HDAM for the R and L unbalanced outputs and one for each of the R and L non-inverted and inverted outputs (six total).
Also, see my response to mcondo's thread ("May not work..") above.
Ken
Edits: 07/05/07 07/05/07 07/05/07
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Easy Polarity Switching for Marantz SA-11... Would this work? - FidPup 07:32:15 07/05/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
