Home Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Tweakers' Asylum ]
[ Alert Moderator ]

RE: Add some carbon fiber to the face plate.

Hi Al,

Thanks for the critique. Removing the straps was inspired by your comments.

I have never understood the carbon fiber idea. Is it to remove the disruption caused by the RF bouncing back and hitting the power cables and other RFs?

So I would place the fiber on the top of the plate. What about lining the inside of the box. Is there other places that the CF works well? What about creating a covering for Power Cables?

The transformer is setting on top of a gator board clone to reduce vibrations. I will apply magnets on the ends of the transformer covers and also some dynamat.

Do you have any feelings about the 193L choke or adding a cap?

I also have two isolation transformers in use. One is plugged into the balanced power outlet and one is wired into the main feed for the balanced power. I will try magnets on them also.

Thanks!

This post is made possible by the generous support of people like you and our sponsors:
  VH Audio  

Follow Ups Full Thread
Follow Ups
FAQ

Post a Message!

 Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2025, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]