|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Then I would go with the silicon device. posted by Al Sekela on October 18, 2006 at 08:31:03:
hI,
well, IR silicon schottky is not cheaper than CREE. I believe there is 30% of difference.
On hificollective advise me about to use the IR 10CTQ150 (10amperes, 150 volts) and assure me that it is the best for this use. They also are in the 300B kits bussines, so I believe they know what are talking.
There are folks that claims that CREE silicon carbide shottky are the best for tubes on this forum also.
Fortunnelly I can get here, on RS-Chile the IR, but CREE I need to import from Canada (partsconnexion, still with shipping, maybe are cheaper than the IR).
What are you refering, exactly, with " so make sure the output voltage is not too high"?
Best regards,
Beto
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Then I would go with the silicon device. - beto1 18:27:10 10/18/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
