|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Re: Where did the term 'tube rollling' come from? posted by Ray Moth on February 2, 2007 at 16:58:53:
Or is his topology the way to go?I'd LOVE to upgrade my power trannies in the LEAK St20's from a life / TBF perspective alone.
AND, I think I'd need to just to get sufficient Bplus! to get the RM wattages.
I feel this may be the more sensible mod/learning path, as against going with a CCS'd / pure A OPT stage.
WarmestTimbo in Oz
The Skyptical Mensurer and Audio ScroungerAnd gladly would he learn and gladly teach - Chaucer. ;-)!
'Still not saluting.'
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- d'ya think RM drives EL84's too hard!? - Timbo in Oz 17:53:07 02/02/07 (8)
- Re: d'ya think RM drives EL84's too hard!? - Ray Moth 14:40:21 02/03/07 (3)
- well I currently get 20 watts @ 20 hz (.5%) and through to 20khz @( .1% thd - Timbo in Oz 17:47:50 02/05/07 (2)
- Re: well I currently get 20 watts @ 20 hz (.5%) and through to 20khz @( .1% thd - Ray Moth 03:43:34 02/14/07 (1)
- The values around the ip and drivers were changed - Timbo in Oz 14:47:49 02/14/07 (0)
- Re: d'ya think RM drives EL84's too hard!? - Tre' 18:41:10 02/02/07 (3)
- I LIKE power!, and I was asking a technical question of Ray. - Timbo in Oz 19:03:19 02/02/07 (2)
- I'm not sure of the question but I have some comments - Russ57 06:14:27 02/03/07 (1)
- See above under Ray Moths' post, too - Timbo in Oz 17:50:26 02/05/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
