RE: Think that might be a typeof fine tuning resistor

Follow Ups Full Thread

Topic - A $5000 speaker with .50 cent caps - Pabloaguas 18:13:01 09/13/24 (63)

RE: A $5000 speaker with .50 cent caps - tomservo 07:07:56 09/22/24 (0)

RE: A $5000 speaker with .50 cent caps - seancuster71@gmail.com 23:03:41 09/18/24 (18)

That's not my experience at all! - E-Stat 08:45:28 09/21/24 (4)

RE: That's not my experience at all! - seancuster71@gmail.com 20:23:47 09/21/24 (3)

ESR & capacitance linearity - 13th Duke of Wymbourne 15:22:52 09/22/24 (1)

RE: ESR & capacitance linearity - seancuster71@gmail.com 19:37:59 09/22/24 (0)

Believe whatever you please -nt - E-Stat 06:08:18 09/22/24 (0)

Like " for others best sounding cap is one they can afford" - Edp 08:26:00 09/19/24 (12)

RE: Like " for others best sounding cap is one they can afford" - seancuster71@gmail.com 20:34:07 09/21/24 (11)

no it's NOT !! - Story 09:03:52 09/22/24 (7)

RE: no it's NOT !! - seancuster71@gmail.com 12:06:41 09/22/24 (6)

you have a link of a pic of the Mundorf? It's neither fixed nor a rheostat - Story 14:16:02 09/22/24 (5)

RE: you have a link of a pic of the Mundorf? It's neither fixed nor a rheostat - seancuster71@gmail.com 15:53:20 09/22/24 (0)

Exactly - E-Stat 15:07:57 09/22/24 (3)

Is this resistor calibrated, each ridge is 5% of total type, or move/ measure - Edp 21:50:23 09/22/24 (2)

It's a linear rheostat - E-Stat 05:22:20 09/23/24 (1)

yea, that's exactly what it's called - Story 06:47:42 09/23/24 (0)

Why soldered at clamp and not on fixed end tab then ? - Edp 08:49:58 09/22/24 (2)

RE: Why soldered at clamp and not on fixed end tab then ? - tomservo 08:58:15 09/22/24 (1)

Thats what i had said bit he said no - Edp 14:01:54 09/22/24 (0)

RE: A $5000 speaker with .50 cent caps - Story 10:03:33 09/16/24 (0)

For merely $290k and some change - E-Stat 13:28:37 09/15/24 (0)

Curt Campbell did very nice work on my current project - John Marks 10:00:34 09/15/24 (18)

The iron core has to go. - Edp 07:55:50 09/16/24 (16)

RE: The iron core has to go. - Curt C 16:31:50 09/18/24 (1)

No worries, Doubt you first to make trade offs - Edp 21:23:54 09/18/24 (0)

RE: The iron core has to go. - tomservo 13:48:33 09/17/24 (3)

Sorry but you should be concerned even when not in HF - Edp 14:48:26 09/17/24 (2)

RE: Sorry but you should be concerned even when not in HF - tomservo 17:35:17 09/17/24 (1)

If you keep the DCR same, the coil gauge is way too small - Edp 08:50:32 09/18/24 (0)

I see no Iron Core inductors in the pic - Story 13:46:07 09/16/24 (9)

Same smear - Edp 14:58:15 09/16/24 (8)

there are differences, but you are correct - Story 16:05:32 09/16/24 (7)

I have boxes of inductors. - Edp 09:07:18 09/17/24 (0)

RE: there are differences, but you are correct - Inmate51 16:26:13 09/16/24 (5)

What data are you looking for? - Edp 08:56:47 09/17/24 (3)

Yes, the baffle step was a big bite, as it was. - John Marks 15:59:06 09/17/24 (2)

Purifi drivers - chocolate_lover 14:46:47 09/18/24 (0)

Isn't point ( ii ) on every clients list - Edp 08:32:26 09/18/24 (0)

RE: there are differences, but you are correct - Story 17:06:06 09/16/24 (0)

RE: Curt Campbell did very nice work on my current project - Pabloaguas 11:31:29 09/15/24 (0)

RE: A $5000 speaker with .50 cent caps - Pabloaguas 22:43:12 09/14/24 (0)

RE: A $5000 speaker with .50 cent caps - Inmate51 05:24:47 09/14/24 (5)

RE: A $5000 speaker with .50 cent caps - Pabloaguas 22:38:34 09/14/24 (1)

RE: A $5000 speaker with .50 cent caps - JoeKool 13:23:39 09/15/24 (0)

But -- it IS possible that AN uses selected NP electrolytics! - mhardy6647 05:31:18 09/14/24 (2)

RE: But -- it IS possible that AN uses selected NP electrolytics! - Pabloaguas 22:13:14 09/14/24 (1)

NP - non polar, no + - /nt - Story 03:30:18 09/15/24 (0)

ahh, yes -- but look at the craftsmanship! - mhardy6647 05:15:23 09/14/24 (4)

RE: ahh, yes -- but look at the craftsmanship! - Pabloaguas 22:15:15 09/14/24 (0)

AudioNote did offer kit options, so may want to find if factorybuilt - Edp 08:08:01 09/14/24 (2)

RE: AudioNote did offer kit options, so may want to find if factorybuilt - Pabloaguas 22:06:23 09/14/24 (0)

they did indeed offer kits -- good point! - mhardy6647 17:12:20 09/14/24 (0)

Get in line, lots of "good" company - Edp 22:14:33 09/13/24 (1)

RE: Get in line, lots of "good" company - Pabloaguas 22:10:00 09/14/24 (0)

RE: A $5000 speaker with .50 cent caps - JCarney 21:26:03 09/13/24 (6)

Think that might be a typeof fine tuning resistor - Edp 22:28:32 09/13/24 (5)

RE: Think that might be a typeof fine tuning resistor - Pabloaguas 22:29:42 09/14/24 (2)

AudioNote often is explaining its choices vs its price - Edp 08:53:09 09/15/24 (1)

Wait, my '73 HiLux was the worst car I have ever owned. It had three - alaskahiatt 10:50:41 09/15/24 (0)

RE: Think that might be a typeof fine tuning resistor - JCarney 09:27:38 09/14/24 (1)

RE: Think that might be a typeof fine tuning resistor - Pabloaguas 22:34:42 09/14/24 (0)

RE: A $5000 speaker with .50 cent caps - Pabloaguas 18:27:41 09/13/24 (0)

Follow Ups

RE: Think that might be a typeof fine tuning resistor - Pabloaguas 22:29:42 09/14/24 (2)

AudioNote often is explaining its choices vs its price - Edp 08:53:09 09/15/24 (1)

Wait, my '73 HiLux was the worst car I have ever owned. It had three - alaskahiatt 10:50:41 09/15/24 (0)

Post a Message!