Speaker Asylum General speaker questions for audio and home theater.

---

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Speaker Asylum ]

---

[ Alert Moderator ]

---

RE: One also needs to know the DCR of the inductor

Posted by 1973shovel (A) on May 28, 2007 at 19:17:29

In Reply to: RE: NHT SuperZero Inductor Value? posted by kenster on May 28, 2007 at 17:50:58:

Hello Kenster,

Not wanting to change the DCR is precisely the reason I wanted to use the original inductor. I knew I had homework to do and thought this would be a great place to start.

And no, I have yet to try a razor knife on the hot glue. I'm not quite ready to dissect the crossover to that degree yet. Everything's mounted on a circuit board, and I don't want to do any damage to the board until I have everything else ready to go for the external set-up. The razor knife is a good suggestion though, maybe along with some heat from a heat gun.

I did replace the electrolytic in series with the tweeter tonight. Put in a 5 mF 100 V MIT film cap I had a pair of. So far the results are good.

Appreciate the feedback!

This post is made possible by the generous support of people like you and our sponsors:

Signature Sound

[ Signature Sound Lounge ]

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2025, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---