|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
I want to drop the gain of the input because it has way too much drive there..Now I talked about changing the grid resistor to 100k on the input but I dont want to go too low becuase the tube can start drawing grid current and then you wind up with dc on the grid of the tube..What about the 10k input resistor? I was thinking of changing it to about 47k.Any other suggestions?
This post is made possible by the generous support of people like you and our sponsors:
Topic - I posted this a couple weeks ago - MIchael Samra 15:47:37 03/15/06 (16)
- Fixed it.. - MIchael Samra 22:54:36 03/15/06 (3)
- Re: Fixed it.. - Jimmy 04:55:18 03/16/06 (2)
- Re: Fixed it.. - MIchael Samra 11:56:32 03/16/06 (0)
- Way ahead of you........ - Jimmy 05:18:33 03/16/06 (0)
- Re: I posted this a couple weeks ago - Jimmy 18:53:57 03/15/06 (1)
- Re: I posted this a couple weeks ago - MIchael Samra 21:19:00 03/15/06 (0)
- Re: I posted this a couple weeks ago - nerdorama 17:02:53 03/15/06 (0)
- Re: I posted this a couple weeks ago - mwiebe 16:37:00 03/15/06 (1)
- Re: I posted this a couple weeks ago - MIchael Samra 17:11:07 03/15/06 (0)
- Why not build it with 6SN7 tubes? - Chris O 16:32:56 03/15/06 (1)
- Re: Why not build it with 6SN7 tubes? - MIchael Samra 17:14:36 03/15/06 (0)
- Re: I posted this a couple weeks ago - Mike Burrows 16:28:52 03/15/06 (4)
- Re: I posted this a couple weeks ago - MIchael Samra 17:13:35 03/15/06 (2)
- Re: I posted this a couple weeks ago - Mike Burrows 17:45:20 03/15/06 (1)
- Its funny you mention the 3-500z - MIchael Samra 21:25:13 03/15/06 (0)
- Sorry for the typo errors - Mike Burrows 16:35:52 03/15/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]