|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Re: Hammond 166 L5 filament transformer posted by Tre' on March 14, 2006 at 15:15:26:
You didn't state in your original post that you would be operating the 300B's in push-pull. I assumed, wrongly, you would have a SET monoblock.The 166L5 is perfect since it has a center tap. There is no need to use a hum pot with a push pull output stage. Just ground the CT.
Regards,
Mike
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Hammond 166 L5 filament transformer - Mike Burrows 15:44:13 03/14/06 (3)
- Re: Hammond 166 L5 filament transformer - Tre' 16:29:02 03/14/06 (2)
- Re: Hammond 166 L5 filament transformer - Mike Burrows 16:59:21 03/14/06 (1)
- Re: Hammond 166 L5 filament transformer - Tre' 21:39:49 03/14/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
