|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Re: you forgot the bias method. posted by Salectric on February 17, 2006 at 07:25:15:
"Joel, are you saying one side of the 220R would be connected to the cathode, and the other to the 10K, with the 100K running from the junction of the 220/10K to the grid?"Exactly. And then take the output from the cathode.
Also: you will need a grid stopper on the grid pin(s). I would try 1k first. Use a carbon composition type. And you will need a capacitor input to the whole thing, as in any bootstrapped CF. 0.047uF will probably be good.
Joel
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: you forgot the bias method. - Joel Tunnah 07:43:57 02/17/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
