|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Re: A question for you posted by drlowmu on January 23, 2006 at 19:59:00:
and what I have heard, I'd encourage you to give them a try. I do think the grid of the output tubes is the right place to use them. Between the rising gain at higher hertz due to it's inductance and the fact that a resonant hertz can be dialed in on the low end through coupling caps size it can allow you to get an overall flatter response without feedback. It takes some trial and error but I think you will be very pleased with the sonic results.
Russ
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Based of what you say about grid leak resistors - Russ57 04:54:07 01/24/06 (2)
- Which ones - drlowmu 07:34:13 01/24/06 (1)
- Just getting started - Russ57 12:01:25 01/24/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
