|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: You really need to do this :) posted by Jim Doyle on October 24, 2005 at 13:30:18:
I originally used NOS 6B4G's and used the 5R4 rectifier to keep the B+ down. Also put in a "dual mono" PS using 2 Dyna chokes (common 10 uf C at the beginning, 400+ uf chokes at the output of each choke. - plenty of room under the chassis.Current unit I'm building has the Sovtek's and it looks like I'll stick with the GZ34 to get the higher voltage.
BTW I put the 6DJ8's on the same filament supply as the output tubes and noticed no problems - has been running for 2 + years. VERY reliable - driving Quad 63's of all things - Heaven, I'm in Heaven
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Comments on : You really need to do this :) - stellavox 16:21:46 10/24/05 (1)
- You really do need a separate filament supply - Jim Doyle 17:37:17 10/24/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
