|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: beg pardon... posted by Vinnie on April 11, 2007 at 15:53:46:
It's a "fluke" due to autoranging when measuring some inductors. As it switches to the lower range, the current goes up, and so does the voltage drop (momentarily), causing it to switch back to the higher range. So just set the range manually and all will settle out. And use insulated clips - DON'T be touching the wires when you OPEN the circuit. Don't ask how I know this...
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: beg pardon... - Tom Bavis 18:08:34 04/11/07 (5)
- Thanks for the 'why'. - Poindexter 20:45:31 04/11/07 (4)
- why not the 27 for road work? - Russ57 06:03:44 04/12/07 (3)
- The 73 is a lot smaller, - Poindexter 08:54:52 04/12/07 (2)
- The newer ones...like 87-III are Much brighter(nt) - Russ57 09:37:46 04/12/07 (1)
- Re: The newer ones...like 87-III are Much brighter(nt) - bluelobster 17:30:41 04/12/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
