|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Re: Limiting the bass posted by mikeyb on April 10, 2007 at 14:31:19:
Mikey>> but it does NOT go to 'zero'
I realize that at very low frequencies
the bypass cap is out of the circuit
and therefore the lower frequencies are muted
as well as having less dampening.> So if you goal is to 'roll off' the low frequency response
Attenuate maybe more apt than 'roll off'.
Less bass means less chance of clipping
on transients which will have sonic effects
occurring higher in frequency.I may increase the cap a little after
the amp is fully broken in but
I will still keep it as small as I can.
I will never put a 200uFd in there.DanL
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Limiting the bass - danlaudionut 15:04:16 04/10/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
