|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Power Transformer with Dual HV Secondaries Pt. II posted by David Anderson on January 29, 2007 at 18:44:23:
They should easily have enough power for a mono amp. If you are going to require more than 250mA, you could use 2 5AR4. You can parallel the 5v windings with no issues provided you keep them in phase. If you start with a choke input and you do not have enough voltage, adding a 1uf cap before the choke will bring up the voltage. You can adjust it this way until about 5uf where the voltage increases stop, more than 5uf helps filtering. You did not say what you wanted to build.
_______________________________
Long Live Dr.Gizmo
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Given that, what are you asking? - Chris O 05:56:23 01/30/07 (2)
- Re: Given that, what are you asking? - David Anderson 08:11:10 01/30/07 (1)
- You have all that you need (and more) - Russ57 10:51:38 01/30/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
