|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Ultrasonic Filaments posted by Triode_Kingdom on January 21, 2007 at 19:04:54:
...audible IM products"I would suspect that hotrodded hirez format (SACD & DVD-A) players would the worst source of potential beats with an ultrasonic heater supply - so I would suggest locking the heater supply oscillator to the clock of your digital source - or more practically - a subharmonic of the clock.
Even though the frequencies of each may be widely different - it's unlikely you would have a heater supply running at the 2.8MHz clock freq of SACD - as long as they are locked to harmonics/subharmonics of each other you shouldn't make audible beats between the various ultrasonic signals that will be present in such a setup.
Regards, Allen
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- To minimize the possibility that certain sources might create... - Allen Wright 06:12:31 01/22/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
