Re: B+ (Quantity) vs Quality - danlaudionut

Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

Follow Ups Full Thread

Topic - lowering output impedance - rick57 21:08:33 10/01/06 (37)

Re: lowering output impedance - Gingertube 16:24:03 10/03/06 (2)

Re: lowering output impedance - rick57@optusnet.com.au 07:01:40 10/04/06 (1)

Re: lowering output impedance - danlaudionut 19:40:48 10/04/06 (0)

Bass horns - Triode_Kingdom 08:20:51 10/02/06 (12)

off the 4 ohm taps . . - rick57@optusnet.com.au 07:12:52 10/04/06 (11)

Re: off the 4 ohm taps . . - Triode_Kingdom 22:18:49 10/04/06 (10)

Ohmâ€™s quantify the drop - rick57 00:35:57 10/05/06 (9)

Re: Ohmâ€™s quantify the drop - danlaudionut 12:11:08 10/07/06 (8)

Re: Ohmâ€™s quantify the drop - Richard Grant 17:42:58 10/07/06 (7)

Re: Ohmâ€™s quantify the drop - danlaudionut 04:25:01 10/09/06 (6)

choke loaded = bass faster and punchier (?) - rick57 23:14:12 10/09/06 (5)

Re: choke loaded = bass faster and punchier (?) - danlaudionut 06:34:13 10/10/06 (4)

choke loaded 690V, but is that with a full wave bridge . . - rick57 06:17:28 10/13/06 (0)

B+ (Quantity) vs Quality - Richard Grant 17:48:21 10/10/06 (2)

Re: B+ (Quantity) vs Quality - danlaudionut 21:04:08 10/10/06 (1)

. . . losing 7 watts is only - 3dB - rick57 01:38:45 10/11/06 (0)

Re: lowering output impedance - danlaudionut 21:15:42 10/01/06 (20)

an extra winding in OPT - rick57@optusnet.com.au 08:12:41 10/04/06 (1)

Re: an extra winding in OPT - danlaudionut 19:33:48 10/04/06 (0)

Re: lowering output impedance/DC offset - Jim Womble 11:41:43 10/02/06 (0)

Re: lowering output impedance - rick57@optusnet.com.au 06:26:27 10/02/06 (8)

Any suggestions for adjustable NFB specifically within the output stage, not using the OPT? - Allen Wright 10:57:04 10/04/06 (0)

Re: lowering output impedance - NoWay 16:59:14 10/02/06 (1)

wrap some around the output tube - rick57@optusnet.com.au 08:14:13 10/04/06 (0)

Sometimes you can't get there from here - Russ57 09:18:56 10/02/06 (4)

effect of XO, - rick57@optusnet.com.au 07:30:02 10/04/06 (0)

Agree 100% - Naz 00:23:02 10/03/06 (2)

Do you use an active crossover? - Russ57 04:18:51 10/03/06 (1)

Sure do but it's a little different - Naz 00:21:05 10/04/06 (0)

When lowering output impedance by NFB, then voltage drive increases. - -3db 04:19:08 10/02/06 (1)

experiment - rick57@optusnet.com.au 06:36:31 10/02/06 (0)

A variation on DanL's idea - Ray Moth 21:54:37 10/01/06 (4)

work with Fixed bias? (nt) - rick57@optusnet.com.au 08:16:09 10/04/06 (0)

Oooh I like that !!! (nt) - danlaudionut 07:57:24 10/02/06 (2)

Re: Oooh I like that !!! (nt) - lipmanl 08:18:26 10/02/06 (1)

Re: Oooh I like that !!! (nt) - danlaudionut 08:28:20 10/02/06 (0)

Re: lowering output impedance - Tre' 21:52:18 10/01/06 (0)

Follow Ups

Re: B+ (Quantity) vs Quality - danlaudionut 21:04:08 10/10/06 (1)

. . . losing 7 watts is only - 3dB - rick57 01:38:45 10/11/06 (0)