|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Re: Sounds like.... posted by cornerstone on August 15, 2006 at 22:11:37:
the two larger pins are the filaments, so if you remember how you had the tube oriented you can figure what shorted out. You can do a quick check of the amp by leaving the defective or errant position open and turning on the amp. If the other channel plays OK, the amp is probably OK. I would open up the bottom and actually check for burnt components first, however, since you saw smoke!m There aren't many parts in a SET amp.
Stu
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Sounds like.... - unclestu52 01:14:21 08/16/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
