|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Re: Allen 60 watt amps..Interesting senario on these amps. posted by MIchael Samra on August 14, 2006 at 00:36:55:
Quicksilver now uses a voltage doubler for the B+ and uses the half way point to feed the screens. You could something similar for the front end circuit if you start off with a 600 volt B+.. Guess it shows there's nothing new under the sun, ast least when it comes to tubes. Also interestingly, I saw a Stromberg Carlson which runs twin B+ secondaries, with a 5U4 for the output tubes and a 6X4 for the inputs. That was pretty neat.
Stu
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Allen 60 watt amps..Interesting senario on these amps. - unclestu52 12:16:44 08/14/06 (3)
- Re: Allen 60 watt amps..Interesting senario on these amps. - MIchael Samra 20:46:37 08/14/06 (2)
- Re: Allen 60 watt amps..Interesting senario on these amps. - Eli Duttman 16:11:44 08/15/06 (0)
- Whew! - unclestu52 22:32:01 08/14/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
