|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: tricks posted by Jim Hagerman on July 18, 2006 at 22:46:05:
You're right, I did make an assumption.
I've used Schottky's in digital gear with excellent results. Reading the archives, I found a way (assumption) to get the Schottky in a high voltage supply.
Thanks for the heads up!
Any diode suggestions for a fwbr 465VDC, 212mA?
Thanks again.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: tricks - wheezer 00:51:56 07/19/06 (7)
- Question: would like to try FWB with 2 tube diodes and 2 SS diodes.... - radiance 13:24:01 07/22/06 (6)
- Re: Question: would like to try FWB with 2 tube diodes and 2 SS diodes.... - wheezer 14:03:51 07/22/06 (5)
- Thanks for answering! That's a great question.....somewhere from... - radiance 18:56:44 07/22/06 (4)
- Re: Thanks for answering! That's a great question.....somewhere from... - wheezer 19:10:46 07/22/06 (3)
- Fast Recovery Epitaxial Diode - google is a wonderful thing.... - radiance 19:52:23 07/22/06 (2)
- Re: Fast Recovery Epitaxial Diode - google is a wonderful thing.... - drlowmu 22:52:14 07/22/06 (1)
- Yes I used a thermistor for the B+ supply tx and NO thermistor.... - radiance 01:17:47 07/23/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
