|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Q: Voltsecond's "Schottky diode trick" posted by wheezer on July 18, 2006 at 12:26:58:
The UF4007 is actually a pretty good part. Quite fast in it's own regard. Why is it you think a faster diode will help? A soft turn-off can be better than fast. Schottkys come with their own problems, too. Like reverse leakage.Don't assume this will be a sonic improvement. Listen carefully.
jh
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- tricks - Jim Hagerman 22:46:05 07/18/06 (10)
- Re: tricks - Doc B. 20:59:00 07/19/06 (0)
- Re: tricks - wheezer 00:51:56 07/19/06 (7)
- Question: would like to try FWB with 2 tube diodes and 2 SS diodes.... - radiance 13:24:01 07/22/06 (6)
- Re: Question: would like to try FWB with 2 tube diodes and 2 SS diodes.... - wheezer 14:03:51 07/22/06 (5)
- Thanks for answering! That's a great question.....somewhere from... - radiance 18:56:44 07/22/06 (4)
- Re: Thanks for answering! That's a great question.....somewhere from... - wheezer 19:10:46 07/22/06 (3)
- Fast Recovery Epitaxial Diode - google is a wonderful thing.... - radiance 19:52:23 07/22/06 (2)
- Re: Fast Recovery Epitaxial Diode - google is a wonderful thing.... - drlowmu 22:52:14 07/22/06 (1)
- Yes I used a thermistor for the B+ supply tx and NO thermistor.... - radiance 01:17:47 07/23/06 (0)
- Wurds a Wiz - Poindexter 23:02:52 07/18/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
