|
Propeller Head Plaza Technical and scientific discussion of amps, cables and other topics. |
|
|
|
Propeller Head Plaza Technical and scientific discussion of amps, cables and other topics. |
|
In Reply to: Give me some examples of what you mean. posted by geoffkait on February 13, 2023 at 06:36:32:
I can describe a couple examples with loudspeakers, things like Heyser was after and what I have been working on for large scale sound..
You have two different speakers, they each have a very similar spectrum / frequency response and when you walk into the room with them playing one at a time, they sound similar. With your eyes closed playing one at a time standing in front of them, it is easy to point at each BUT with one type it was easy to guess/localize how far away it was, while the other was easy to point at but how far away it sounded depended on the recording.
In stereo, one pair virtually disappears within the phantom image, you may not even be aware of the speakers while the other pair presents a stereo image AND the right and left speakers stand out as part of the image.
Same situation, two pairs of speakers with very similar response but in stereo one pair present the mono phantom voice as a person standing in front of you, the other presents a wall of that persons image and everything else.
If you know what does these things, one can minimize them , to find the causes takes modifications, measurements and listening in a repeat as needed loop..
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Give me some examples of what you mean. - tomservo 08:59:52 02/13/23 (1)
- Didn't you get the memo? More than one par of speakers in the room is a big no no. - geoffkait 06:28:28 02/15/23 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
