|
Propeller Head Plaza Technical and scientific discussion of amps, cables and other topics. |
|
|
|
Propeller Head Plaza Technical and scientific discussion of amps, cables and other topics. |
|
In Reply to: Filtered out..... posted by tomservo on October 17, 2006 at 09:40:33:
I am thinking about trying open baffle bass and if I understand what you are saying this "filter" sounds ideal.I am just getting started and am new to speaker building so nothing is set in stone. At this time I have the Audax PR170MO as a mid and am leaning towards getting a pair of Dayton IB385-8. The spec sheet can be viewed at http://www.partsexpress.com/pdf/295-455.pdf. However the Audax can only go down to about 250 or so. The spec sheet for it is here http://www.madisound.com/pdf/audax/pr170m0.pdf.
For the time being I'll probably use an active crossover and bi or tri-amp. Any advice you care to share would be appreciated. I don't know what type of tweeter is best suited to an open baffle approach or if it matters. I'd rather not run the audax much past 2khz.
TIA,
Russ
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- I'd like to hear more Tom - Russ57 12:17:04 10/18/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
