|
Pro Audio Asylum Pro studio recording equipment and music production/industry. |
|
|
|
Pro Audio Asylum Pro studio recording equipment and music production/industry. |
|
In Reply to: Great news.... posted by Nemo on January 20, 2002 at 17:36:44:
No, I may have mis-understood you or you, me.ADAT option card for 01V is ADAT format. 8 channels in and 8 out.
for instance. Connect a PD with an ADAT option in th eaudio card. Or connect and ADAT tape deck or a Fostex HD recorder, etc. etc.
Now lets say you have S/Pdif on coax. That can run stright to the V via the two RCA jacks on the mixer.
If you have S/PDIF on Toslink you would need to buy or build a converter ( maybe ). do a search for CO2 from Midiman I think.
If you look at the next message I sent about RME. their box can run S/PDIF out of 1 of the ADAT lightpipes as can a few other PC sound cards.
You asked for midi control so I assumed you wre getting a PC card involved in this as well.
You are hard pressed to beat the Hammerfall / 01v setup for the money. You don't need their top line DSP interfaces if you get the mixer too. A 96/8 will do. Their cards are getting much cheaper since the release of the DSP line.
You can also get an AES/EBU option card for the V but you can only use one option card at a time. You would have to physically switch them.
Hope this sheds some light.
S
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Great news.... - Swingline 17:48:19 01/20/02 (2)
- Re: Great news.... - Nemo 18:12:44 01/20/02 (1)
- Re: Great news.... - Swingline 07:23:21 01/21/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
