Re: Depends on the ballistics of your metering System.

Pro Audio Asylum

Pro studio recording equipment and music production/industry.

213.122.34.141

In Reply to: Re: Depends on the ballistics of your metering System. posted by Blade on June 5, 2001 at 22:02:36:

Then the pots on the amps should be up full, these are attn not preamps. As I said before, I wouldn't want to have the metering averaging over 0-3db VU on Rock music. If the gain structure is correct through your graphic and active crossover and you are pushing more than this, I respecfully suggest that you don't have enough power for the gig. Volume should be controlled from the master output faders, and the gain structure down the channel strip should be as for recording, ie pre-amping mics and lines to unity gain through the use of the input pot, balancing the mix with the faders, and controlling the volume of the system from the master faders.
Hope this answers your question.
Roland

This post is made possible by the generous support of people like you and our sponsors:

Sonic Craft

Follow Ups Full Thread

Topic - Question on gain structure... - Nolat 20:49:19 05/31/01 (6)

Re: Question on gain structure... - RBP 21:06:19 05/31/01 (5)

Re: Question on gain structure... - Nolat 22:57:03 05/31/01 (4)

Depends on the ballistics of your metering System. - RBP 23:42:29 05/31/01 (3)

Re: Depends on the ballistics of your metering System. - Roland 20:03:14 06/01/01 (2)

Re: Depends on the ballistics of your metering System. - Blade 22:02:36 06/05/01 (1)

Re: Depends on the ballistics of your metering System. - Roland 18:11:10 06/06/01 (0)

Follow Ups

Re: Depends on the ballistics of your metering System. - Roland 18:11:10 06/06/01 (0)

You can not post to an archived thread.