|
Pro Audio Asylum Pro studio recording equipment and music production/industry. |
|
|
|
Pro Audio Asylum Pro studio recording equipment and music production/industry. |
|
In Reply to: Question on gain structure... posted by Nolat on May 31, 2001 at 20:49:19:
No...I run my Mixer no higher than 0 and leave the Amp cranked to Max...(which is actually non-attenuated) The Amp gain controls are level attenuators and not "boosters". Full Up would be unity to the amps' normal input sensitivity.
Adjust the gain stucture for minimum noise floor.
I have my system calibrated where my Amps have only 3dB headroom at +4.
3dB headroom is 50% power.
The input sensitivity of your amplifiers may require setting of the gain controls. I calibrate with the monitor out POT.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Question on gain structure... - RBP 21:06:19 05/31/01 (5)
- Re: Question on gain structure... - Nolat 22:57:03 05/31/01 (4)
- Depends on the ballistics of your metering System. - RBP 23:42:29 05/31/01 (3)
- Re: Depends on the ballistics of your metering System. - Roland 20:03:14 06/01/01 (2)
- Re: Depends on the ballistics of your metering System. - Blade 22:02:36 06/05/01 (1)
- Re: Depends on the ballistics of your metering System. - Roland 18:11:10 06/06/01 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
