|
Pro Audio Asylum Pro studio recording equipment and music production/industry. |
|
|
|
Pro Audio Asylum Pro studio recording equipment and music production/industry. |
|
In Reply to: Need Small PA Spkr Suggestions posted by Frost on February 18, 2001 at 19:22:21:
The bst overall gig system I have encountered was (4) S200 EV's on poles at 80hZ and two 15 bins..(homemade)The bins were simple 24X24X24 cubes and they pointed into a plywood corner that loaded flat in an excursion. they were 48X24X3/4 and each had a top.
To assemble the bins...it was wingnuts...foam weatherstrip seal..(top) and a 2X4 with carrage bolt/wingnuts for the apex of the corner.
Totally the whole system with Drum kit would go in the Excursion.
Ran an old beat up Peavy 800 on the bottom, and a Croen Microtech 1200 on the tops...with a madisound(sledgehammer) electronic Xover.
Many gigs one sub was enough.
The speakers (sats) would go one on each side of the stage, and the other two 10 feet out on the sides of the audience.
This system sounded very nice. Low end to a solid 40 (it was a EVM15B in the bin with a 6" diameter 10" long port.)
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Need Small PA Spkr Suggestions - RBP 22:02:04 02/18/01 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
