Pro Audio Asylum Pro studio recording equipment and music production/industry.

---

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Pro Audio Asylum ]

---

[ Alert Moderator ] [ Edit ] [ Delete ]

---

RE: 3 way XO- Behringer or DBX, or...?

143.236.92.53

Posted by Pro Sound Guy on October 13, 2010 at 06:56:29

In Reply to: RE: 3 way XO- Behringer or DBX, or...? posted by HiOnFi on October 12, 2010 at 12:05:15:

Well having steep slopes is the key so you have no phase issues
Linkwitz Riley @24db per octave slopes should be minimum

Since you are running pro equipment why not have better control and slope
choices and better bandwidth overlap control and use a DBX driverack?

You have 31band eq/parametric eq/slope choices/bandwidth choices/compression/limiter etc
You can run pink noise and use a measurment mic and really dial those maggies in

There is better driveracks then the pa model but they will cost you
much more money

I have a DBX driverack pa, and I use RANE active xovers on my pro sound gear

• http://www.youtube.com/watch?v=gIMqCDW5ZXc   (Open in New Window)

This post is made possible by the generous support of people like you and our sponsors:

Sonic Craft

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2025, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---