Home Computer Audio Asylum

Music servers and other computer based digital audio technologies.

Computers can be a pain, I know

Where did you have the DVD drive connected? What was it set as (master or slave)?

When you got the error that there was no OS the problem was likely to be due it trying to boot off of the wrong drive. This is corrected in the bios by choosing which drive you want it to boot from. The other possibilty is that the system did not detect the drive with your OS, but you seem to state that it did.

The DVD drive may be OK with the 40-strand cable, but you probably should be using 80-strand on the hard drive. Still, it should have booted I think.

You can email me if you want. Let me know your computer, what you have on each IDE (slave and master) and what is set to what (slave/master).


This post is made possible by the generous support of people like you and our sponsors:
  Sonic Craft  


Follow Ups Full Thread
Follow Ups


You can not post to an archived thread.