Home OTL Asylum

OTL, Output Transformerless Amplifier User Group.

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ OTL Asylum ]
[ Alert Moderator ]

Not recommended

I would assume that the HV supply of the S30 makes +/-300V. Therefore the voltage at the plate of the top tube in the cascode that has to be AC coupled to the driver stage is probably at somewhere around 200V, give or take 50V. Not good for a 200V capacitor. Ralph will probably tell you not to do it, unless I am way off in my estimation of the voltage, but I doubt that I am. You want a wide safety margin in this application, so not less than 400V or even 600V isn't a crazy idea. You could use two of the Russian caps in series, but then your capacitance drops to half the value of one cap.

This post is made possible by the generous support of people like you and our sponsors:
  Sonic Craft  

Follow Ups Full Thread
Follow Ups
FAQ

Post a Message!

 Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]