|
OTL Asylum OTL, Output Transformerless Amplifier User Group. |
|
|
|
OTL Asylum OTL, Output Transformerless Amplifier User Group. |
|
In Reply to: Zoebel network posted by Dragan P. on May 6, 2001 at 09:10:07:
Dragan,Thank you for the interesting information on cable zoebel networks. Your English is quite good.
It seems that the purpose of a Zoebel network installed at the end of a cable run is to compensate for bad things that the speaker cable itself is causing. If this is true, then having the amplifier directly connected to the speaker would not need the cable Zoebel network. Would you consider this a true statement?
If the amplifier is producing a 10kHz square wave, I'm sure the signal will look different at the end of the speaker cable, than it did coming out of the amplifier. So next I wonder, if I connect an oscilloscope at the end of the speaker cable (with the speaker connected) and watch the signal as I add different Zoebel networks, if the best sound is also when the best looking square wave is achieved. What do you think?
Paul Speltz
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Zoebel network - Paul Speltz 08:31:46 05/07/01 (1)
- Re: Zoebel network - Lew 10:25:29 05/07/01 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
