|
OTL Asylum OTL, Output Transformerless Amplifier User Group. |
|
|
|
OTL Asylum OTL, Output Transformerless Amplifier User Group. |
|
In Reply to: Re: Added a preamp, can't get a steady DC offset on... posted by bryan on March 27, 2001 at 07:37:22:
Bryan,I'm using 2 uF caps. This may be the difference. Are there any audible effects with the 3 uF caps? When my preamp was just breaking in, I had what sounded like some oscillation of the signal; a kind of picket fencing kind of sound. It only happened twice and only for a few seconds each time, but I think the bass, primarily, was modulated. I'd definitly try a 2 uF in place of the 3 uF. Good luck and keep us posted. Thanks!
- Garland
P.S.- Just an aside: I had thought that I was pretty good at soldering when I started my M-60MKII's and Foreplay kits but after finding several instances of cold solder joints as the cause of various noise and hum problems I realize the importance of a good solder joint! It can't hurt to check and reflow all the joints again. - What a pain but often worthwhile.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Added a preamp, can't get a steady DC offset on... - Garland 09:56:17 03/27/01 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
